Truck Camper Near Whittier, California
Slide in truck campers, including jack mount tear out and the wall it pulled through. Work in this scope runs $1,000 to $15,000 at OCRV Center, billed from the published rate card and evaluated in shop before anything is authorized. The facility sits in Yorba Linda, roughly twenty minutes from Whittier down the I-605.
What this scope covers
Slide in truck campers, including jack mount tear out and the wall it pulled through.
It sits inside the campers program at OCRV Center, which is where the neighbouring scopes and the shared process live. Everything is performed in shop at the Yorba Linda facility, and there is no mobile or roadside option for this work.
- Program
- Campers
- Labor rate
- $260 per hour, mechanical and electrical
- Typical band
- $1,000 to $15,000
- Labor hours
- 8 to 60 hours
- Evaluation
- Priced and credited against an authorized repair. Collision teardown is one hour at $210, RV systems is $150, in depth diagnostic is one hour at $285.
- Where
- 23281 La Palma Ave, Yorba Linda, CA 92887. Serving Whittier and Los Angeles County.
Published rate card
Truck Camper price band
Bands are the working range for this scope at OCRV Center, not a quote. Body and paint labor bills at $210 per hour and mechanical at $260. The exact figure comes from the priced evaluation, which is credited against an authorized repair.
Sidewall cross section
What the campers wall is actually made of
Every water and delamination decision on this vehicle comes back to the layer order in the sidewall. Outermost layer first:
- 01Aluminum or composite skin
- 02Foil facing
- 03Block foam core
- 04Wood or aluminum frame
- 05Thin luan liner
- Bond system
- Vacuum bonded panel adhesive on composite builds, mechanical fastening on stick built
- Moisture path
- Water enters at roof seams, the jack mounting plates and the lift mechanism cutouts, then follows the frame down and surfaces at the floor perimeter.
- Crossover point
- On a wall this thin there is little to rebond. Once the core is wet, the panel section is replaced rather than injected.
- Where this is evaluated
- In shop at the Yorba Linda facility. Moisture mapping is part of the priced evaluation and is credited against an authorized repair.
Common questions
What does truck camper cost at a Whittier area shop?
$1,000 to $15,000 is the working band at OCRV Center, which is 8 to 60 hours of labor plus parts and materials. The exact figure comes from a priced evaluation that is credited against an authorized repair. Body and paint labor bills at $210 per hour, mechanical and electrical at $260.
Do I have to bring the vehicle in for truck camper?
Yes. OCRV Center is an in shop operation with no mobile service and no roadside work. The facility is at 23281 La Palma Ave, Yorba Linda, about twenty minutes from Whittier on the I-605.
Will insurance cover truck camper on my campers?
If the damage is from a covered loss, generally yes, and the shop bills direct with every major carrier. Wear, age and deferred maintenance are usually owner pay. The evaluation tells you which side of that line the damage falls on before you file.
How does water reach this area on a campers?
Water enters at roof seams, the jack mounting plates and the lift mechanism cutouts, then follows the frame down and surfaces at the floor perimeter. That path is why the entry point and the damage you can see are rarely in the same place, and why the evaluation maps the whole run rather than the stain.
More campers scopes
- Pop Up Camper
Folding campers, lift systems, tenting and the roof panel they carry.
- Teardrop Camper
Teardrop and micro trailers, usually a single bonded shell with no second chance at the core.
- Overland Camper
Composite overland boxes and expedition campers, including mounting frame repair.
Bring it in
Insurance walk ins are welcome. The teardown hour is priced at $210 and credited against an authorized repair, so the evaluation is not a cost you lose if the work proceeds.
23281 La Palma Ave, Yorba Linda, CA 92887. Monday to Friday 8:00 AM to 5:00 PM, Saturday 9:30 AM to 3:00 PM.