Rivian and Specialty: Body, Structural and Systems Repair Near Whittier
Electric delivery vans, Rivian, and purpose built bodies. High voltage vehicles are handled with the pack isolated before any body work starts. OCRV Center covers 5 distinct scopes inside this program, all performed in shop at the Yorba Linda facility. Owners across Whittier and Los Angeles County reach it on the I-605 and SR-72.
5 pages
Vehicle types we take
- Rivian
Rivian delivery vans and trucks, aluminum and bonded structure collision repair.
- Electric Delivery Van
BrightDrop, eTransit and similar electric commercial vans.
- Mobile Medical Unit
Medical and screening coaches, body repair with the equipment bay kept sealed.
- Food Truck
Food truck and trailer bodies, service windows, skins and interior panel repair.
- Command and Broadcast
Command centers and broadcast coaches, body and mast penetration repair.
Published rate card
What this costs
Bands are the working range for this scope at OCRV Center, not a quote. Body and paint labor bills at $210 per hour and mechanical at $260. The exact figure comes from the priced evaluation, which is credited against an authorized repair.
Sidewall cross section
What the rivian and specialty wall is actually made of
Every water and delamination decision on this vehicle comes back to the layer order in the sidewall. Outermost layer first:
- 01Composite or aluminum skin
- 02Bonded structural frame
- 03Insulation and harness raceway
- 04Equipment mounting substrate
- Bond system
- Structural adhesive bonded frame with limited mechanical fastening, which changes every repair decision
- Moisture path
- Water enters at equipment penetrations and charge port surrounds, then reaches harness raceways where it shows up as a fault code rather than a stain.
- Crossover point
- Bonded structure is sectioned only where the manufacturer publishes a procedure. Where none exists, the assembly is replaced.
- Where this is evaluated
- In shop at the Yorba Linda facility. Moisture mapping is part of the priced evaluation and is credited against an authorized repair.
In shop process
How the job actually runs
- Step 01
Get the vehicle to Yorba Linda
Drive or tow the vehicle to 23281 La Palma Ave, Yorba Linda. Insurance walk ins are welcome and no appointment is needed to start a collision teardown.
- Step 02
Priced evaluation
Collision teardown is one hour at $210, an RV systems evaluation is $150, and an in depth diagnostic is one hour at $285. Every one of those is credited against an authorized repair, so the evaluation is not money you lose.
- Step 03
Scope and carrier
You get the scope in writing with rate card figures against it. If a carrier is involved the shop bills direct and handles supplements on line items the adjuster missed.
- Step 04
Authorize, then the deposit applies
Jobs over $2,000 take a 50 percent deposit at authorization, and jobs over $10,000 take a further 25 percent when parts land. OCRV Center orders nothing before you authorize it.
- Step 05
The work
Structural and moisture work closes out before any finish goes back on. Bonded structure is sectioned only where the manufacturer publishes a procedure. Where none exists, the assembly is replaced.
- Step 06
Pickup
Final balance is due at pickup. Card payments over $1,000 carry a 3.5 percent surcharge, which passes through the merchant fee rather than burying it in the labor rate.
Common questions
What is included in the rivian and specialty program at OCRV Center?
Electric delivery vans, Rivian, and purpose built bodies. High voltage vehicles are handled with the pack isolated before any body work starts. The program covers 5 scopes: rivian, electric delivery van, mobile medical unit, food truck, command and broadcast. All of it happens in shop.
How long does rivian and specialty work usually take in Whittier?
Labor bands across this program run from a few hours to several hundred. Parts availability drives the calendar more than labor does, and special order parts require a full non refundable deposit at the time of order, so the schedule is set once parts are confirmed.
Where does rivian and specialty repair stop and replacement start?
Bonded structure is sectioned only where the manufacturer publishes a procedure. Where none exists, the assembly is replaced. That threshold is a structural judgment, not a preference, and it is made during the priced evaluation rather than after teardown has already been billed.
What needs doing?
Every service program below takes this vehicle. Pricing bands are on each one.
Scope boundary
What this shop does not take
No mobile service. Every job happens at the facility.
No roadside assistance and no on site evaluation.
No engine rebuild and no internal engine machining.
No transmission rebuild and no drivetrain overhaul.
No DOT inspection and no DOT certification.
No emission testing and no emission certification.
No telematics installation and no fleet software.
No fleet consulting and no driver training programs.
Everything above is work OCRV Center declines rather than work it performs poorly. The facility is a body, paint, structural and onboard systems shop, and it is an in shop operation.
Bring it in
Insurance walk ins are welcome. The teardown hour is priced at $210 and credited against an authorized repair, so the evaluation is not a cost you lose if the work proceeds.
23281 La Palma Ave, Yorba Linda, CA 92887. Monday to Friday 8:00 AM to 5:00 PM, Saturday 9:30 AM to 3:00 PM.