Transfer Switch and Shore Power Near Whittier, California
Automatic transfer switches, shore cords, inlets and pedestals feeding them. Work in this scope runs $285 to $1,500 at OCRV Center, billed from the published rate card and evaluated in shop before anything is authorized. The facility sits in Yorba Linda, roughly twenty minutes from Whittier down the I-605.
What this scope covers
Automatic transfer switches, shore cords, inlets and pedestals feeding them.
It sits inside the onboard systems program at OCRV Center, which is where the neighbouring scopes and the shared process live. Everything is performed in shop at the Yorba Linda facility, and there is no mobile or roadside option for this work.
- Program
- Onboard Systems
- Labor rate
- $210 per hour, body and paint
- Typical band
- $285 to $1,500
- Labor hours
- 1 to 6 hours
- Evaluation
- Priced and credited against an authorized repair. Collision teardown is one hour at $210, RV systems is $150, in depth diagnostic is one hour at $285.
- Where
- 23281 La Palma Ave, Yorba Linda, CA 92887. Serving Whittier and Los Angeles County.
Published rate card
Transfer Switch and Shore Power price band
Bands are the working range for this scope at OCRV Center, not a quote. Body and paint labor bills at $210 per hour and mechanical at $260. The exact figure comes from the priced evaluation, which is credited against an authorized repair.
Common questions
What does transfer switch and shore power cost at a Whittier area shop?
$285 to $1,500 is the working band at OCRV Center, which is 1 to 6 hours of labor plus parts and materials. The exact figure comes from a priced evaluation that is credited against an authorized repair. Body and paint labor bills at $210 per hour, mechanical and electrical at $260.
Do I have to bring the vehicle in for transfer switch and shore power?
Yes. OCRV Center is an in shop operation with no mobile service and no roadside work. The facility is at 23281 La Palma Ave, Yorba Linda, about twenty minutes from Whittier on the I-605.
Will insurance cover transfer switch and shore power on my onboard systems?
If the damage is from a covered loss, generally yes, and the shop bills direct with every major carrier. Wear, age and deferred maintenance are usually owner pay. The evaluation tells you which side of that line the damage falls on before you file.
More onboard systems scopes
- Solar Installation
Panel, controller and wiring installation with roof penetrations sealed into the membrane properly.
- Antenna and Starlink Install
Roof mounted antenna and satellite internet hardware, mounted and sealed.
- Camera Installation
Backup and side camera systems wired to an in dash or standalone display.
- LP System Service
Regulators, lines, fittings and pressure testing across the propane system.
- Detector Replacement
LP, carbon monoxide and smoke detectors replaced on the expiry date stamped on the unit.
- Furnace Service
Forced air furnace diagnosis, sail switch, board and burner service.
Bring it in
Insurance walk ins are welcome. The teardown hour is priced at $210 and credited against an authorized repair, so the evaluation is not a cost you lose if the work proceeds.
23281 La Palma Ave, Yorba Linda, CA 92887. Monday to Friday 8:00 AM to 5:00 PM, Saturday 9:30 AM to 3:00 PM.